Is this a 1350RPM fan?

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
dentaku
Posts: 110
Joined: Tue Dec 14, 2004 7:33 am
Location: Canada

Is this a 1350RPM fan?

Post by dentaku » Wed Jun 29, 2005 4:56 am

Does this look like a 1350RPM Yate Loon?
http://tekgems.com/Products/et-13713-fan-d12sl-12.htm

A d12sl-12 can also be a 100RPM Nexus so it's hard to tell which one it would be. I'm guessing it's a REAL Yate Loon and not a Nexus because they would probably say so on the site if it was.

Bluefront
*Lifetime Patron*
Posts: 5316
Joined: Sat Jan 18, 2003 2:19 pm
Location: St Louis (county) Missouri USA

Post by Bluefront » Wed Jun 29, 2005 6:27 am

Yep....That's the real thing. A genuine Yate Loon@ about 1350rpms. Got two of the things. You won't be disappointed. :lol:

aowen512
Posts: 104
Joined: Mon Jun 20, 2005 6:34 pm

Post by aowen512 » Wed Jun 29, 2005 11:43 am

yea bluefront and you are correct

those are true yate loons, they also carry the medium speed blue led yate loons as well for the same price so check that out too

dentaku
Posts: 110
Joined: Tue Dec 14, 2004 7:33 am
Location: Canada

Post by dentaku » Fri Jul 01, 2005 7:08 am

Bluefront wrote:Yep....That's the real thing. A genuine Yate Loon@ about 1350rpms. Got two of the things. You won't be disappointed. :lol:
I just ordered 2 of the orange ones and learned that the US/CAN exchange rate isn't too bad at the moment.
Of course it was $14 for the shipping but that's not too bad considering the fans are only around $9 each.

dentaku
Posts: 110
Joined: Tue Dec 14, 2004 7:33 am
Location: Canada

I got them

Post by dentaku » Mon Jul 11, 2005 4:09 pm

Just to follow up (as if anyone's gonna see this), I got my 2 Yate Loon fans from Tekgems today. I ordered them on the first and got them on the tenth. That's not bad considering they had to come from San Francisco all the way to the other side of the continent and over the border into Canada.

I have one installed at the moment (it runs at 1450ish RPM at 12V and haven't tried it out at 7V yet). I'll have to modify my case to install the read exhaust because I don't have room to install a 120mm inside the case. i don't care if I have to install it on the outside sticking out the back, it's not like you can see the back of my computer.

Post Reply