it's my first build so..
i recently bought two nexus 92mm fans to use for the front of a p150 case (that i couldn't sell). currently i've been having problems trying to find a way to get them attached. no screws came with the nexus fans, and antec didn't include any extras with the case that will work. i was just at the hardware store with my fan, and a screw that will work to try and find something, but either the threading isn't substantial enough to secure it, or it's just a little to small or big. i'm probably a complete idiot, but any help is appreciated.
Probably a dumb question.. (about screws)
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
An excellent chance to decouple them a bit with some alternative mounting method. I, for one, have fan screws to beat the band. But you can make up some nice semi-softmounts with zipties and rubber o-rings (from that very same hardware store). Just get a ziptie large enough to just pass through the fan holes, some O-rings and washers around the same size as the fan screwholes...
Here's how I did mine. Ziptie through washer through O-ring, through fan, on the outside, another o-ring, another washer, then cinch on the head from another zip-tie. Snip off the excess from both.
If you're just set on hard mounting them, you could probably find a computer shop that has some of the little buggers to sell you.
Here's how I did mine. Ziptie through washer through O-ring, through fan, on the outside, another o-ring, another washer, then cinch on the head from another zip-tie. Snip off the excess from both.
If you're just set on hard mounting them, you could probably find a computer shop that has some of the little buggers to sell you.
-
- Posts: 7
- Joined: Sun Aug 20, 2006 1:24 am
that's cool . i probably went overkill with putting three washers between the fan and the case (rubber/steel/rubber), seeing how zenboy mentioned he only used washers on either end of the zip tie. the only downside to this i have found is that on my p150 case, there is a removable filter that can cover the two front 92mm fans. but the zip tie ends get in the way when you try to attach it. it's not a very big deal to me since i didn't plan on using the filter anyways.