where to buy yate loon 92mm ?

tomy · Post by **tomy** » Tue Oct 09, 2007 11:35 am

googled for like half hour, cant find a store... someone know any?

Bluefront · Post by **Bluefront** » Tue Oct 09, 2007 12:40 pm

Jabtech has the medium speed version. It's not too bad when under-volted. The low speed version is hard to find. There's a guy that sells them on E-Bay. Don't know the name....

tomy · Post by **tomy** » Tue Oct 09, 2007 2:03 pm

too bad, the guy on ebay doesnt have the 92mm yl anymore.

jhhoffma · Post by **jhhoffma** » Wed Oct 10, 2007 6:24 am

The eBay guy is (was) Silencio_777. He doesn't really sell Yate-Loons anymore. At least, not many, and not the 92mm variant.

I've not found anyone else that does, but if I did, it'd probably be cheaper to buy another fan more readily available.

What purpose will this fan have, will it be mounted singly or side-by-side with another fan?

Scythe has the Kaze-Jyu series which are 100mm fans, but have mounts for 92mm screws. The low speed variant is very quiet @ 12v, the medium speed, not so much but both undervolt well and are pretty inexpensive. But you can't fit them side by side in 92mm slots like on a Solo, they are a little too big.

tomy · Post by **tomy** » Wed Oct 10, 2007 9:15 am

was going to get one for the case and one to try to fanswap the 92 on the zalman 7000alcu,

they'll need to be undervolted- i dont know how much the cpu fan is at-with the fanmate but maybe between 7-5v (its not 5 because the zalman starts clicking at lowest fanmate)

jhhoffma · Post by **jhhoffma** » Thu Oct 11, 2007 6:36 am

Well, I used the L/S Kaze-Jyu in my Zalman 7000B (2 actually, one a medium), but I wouldn't recommend it. I had to shave off about 2mm (with a dremel) from the tips of each blade to make it fit, and even then it wasn't easy to fit it.

As a case fan, it will probably work fine.

Ryan Norton · Post by **Ryan Norton** » Thu Oct 11, 2007 7:29 am

I got some off ebay from a guy whose ID was something like thefanvan.