3 wire PCI Slot Fan?

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
signal64
Posts: 61
Joined: Sun Apr 09, 2006 4:11 am

3 wire PCI Slot Fan?

Post by signal64 » Wed Feb 06, 2008 2:12 am

I'd like to control and monitor the speed of a PCI slot fan via the motherboard and have been searching for a 3 wire version (if such a thing exists).

I unfortunately need to keep to what's been a common form factor for this type of fan.

Example:
Image

Does such a beast exist?

Bluefront
*Lifetime Patron*
Posts: 5316
Joined: Sat Jan 18, 2003 2:19 pm
Location: St Louis (county) Missouri USA

Post by Bluefront » Wed Feb 06, 2008 2:58 am

I never saw such a fan, but there are plenty of two wire slot fans around.

Not to worry......you can make your own easily enough. In the Monster Slot Fan thread I posted pictures and descriptions. I've done this mod to at least six different fans, and at least two were 80x15mm. these can be adapted to blow out a PCI slot.....fairly easy mod.
[size=75]"At the core of liberalism is the spoiled child - miserable, as all spoiled children are, unsatisfied, demanding, ill disciplined, despotic, and useless. Liberalism is the philosophy of sniveling brats." - P.J. O'Rourke[/size]

signal64
Posts: 61
Joined: Sun Apr 09, 2006 4:11 am

Post by signal64 » Wed Feb 06, 2008 3:29 am

Oooo... ok.. I have enough parts to play around with that.
I have the same Scythe fans and funny enough, an old internal CD ROM case looks to be useful for this experiment (I have the hole saws for metal work).

In the end it turns out I'm trying to get something like a "Lian Li BS-01 Aluminum Blower". Didn't know it existed.

I currently have a PCI Slot fan (that I pictured above) mounted horizontal above the PCI Slots in a rackmount case that has vent holes there.

I don't need high CFM and can do without the noise.

Thanks for the suggestion. I will give it a shot.

Post Reply