To [Dremel] or not to [Dremel], that is the question
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
To [Dremel] or not to [Dremel], that is the question
Hello fellow SPCR readers,
I want to dremel the grills for my front case fan and rear case fan to allow more airflow and reduce the noise. For the rear there is nothing really stopping me, it is more the front that I have issues with.
Now I have long removed the HD cage to improve airflow. However, this is how the components are sandwiched.
Fan > Case Grill > Filter > plastic front case cover with holes on the sides for air intake.
My question is: Would cutting the front grill eliminate any noise or even improve airflow with all the obstruction of the filter? Or would just the noise be reduced since the air filter probably doesn't create much turbulence?
SPCR Experts please feel free to comment
I want to dremel the grills for my front case fan and rear case fan to allow more airflow and reduce the noise. For the rear there is nothing really stopping me, it is more the front that I have issues with.
Now I have long removed the HD cage to improve airflow. However, this is how the components are sandwiched.
Fan > Case Grill > Filter > plastic front case cover with holes on the sides for air intake.
My question is: Would cutting the front grill eliminate any noise or even improve airflow with all the obstruction of the filter? Or would just the noise be reduced since the air filter probably doesn't create much turbulence?
SPCR Experts please feel free to comment
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
It is the Ultra X-Blaster. I figured noise wouldnt be WORSE. The front grill looks just like the front one (the bunch of circles) In addition to a fan clip which probably has more plastic pieces. I guess it wouldnt be so hard to cut anyways. Have people noticed any noticeable changes after cutting their grills?
I don't think there's much to gain from just removing the grill. One problem is the limited openings in the front bezel. Perhaps those side vents can be drilled out to be larger (and more of them)?
Drilling holes through the bezel directly in front of the fan will improve cooling, but also add noise (speaking from my own experience).
Cheers
Olle
Drilling holes through the bezel directly in front of the fan will improve cooling, but also add noise (speaking from my own experience).
Cheers
Olle
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
What I meant is that drilling new holes straight out from the fan will provide turbulence as well as let the sound out.syrian_gamer wrote:yes but dont they provide turbulance and cause noise?
A combination of enlarged intakes at the sides, where there are holes already, and adjusted fan speed can reduce the noise.
But you must ask yourself what you want; more air or less noise? More/larger holes will provide more air. That allows you to reduce the fan speed to keep the airflow at the current rate, leave it untouched for better cooling, or somewhere in between.
Cheers
Olle
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Hi,
Many of us have done it. The safest way to do it is to remove all the electronics; especially the motherboard. Then use a good pair of tin snips (metal shears) and then you can use a rotary tool (like a Dremel or a Black & Decker) or a metal file to deburr and smooth the edge if neccessary -- and then vacuum thoroughly and wipe it down with a cleaner. You do not want to leave any metal bits in the case that might short out anything...
Many of us have done it. The safest way to do it is to remove all the electronics; especially the motherboard. Then use a good pair of tin snips (metal shears) and then you can use a rotary tool (like a Dremel or a Black & Decker) or a metal file to deburr and smooth the edge if neccessary -- and then vacuum thoroughly and wipe it down with a cleaner. You do not want to leave any metal bits in the case that might short out anything...
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
Yeah I figured removing the mobo would be a good idea Have you experienced better temps from removing the rear grill? or less noise perhaps?NeilBlanchard wrote:Hi,
Many of us have done it. The safest way to do it is to remove all the electronics; especially the motherboard. Then use a good pair of tin snips (metal shears) and then you can use a rotary tool (like a Dremel or a Black & Decker) or a metal file to deburr and smooth the edge if neccessary -- and then vacuum thoroughly and wipe it down with a cleaner. You do not want to leave any metal bits in the case that might short out anything...
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
Im currently getting my case dremeled (removing the front grills), here is how my pc looks right now. I couldnt be more ghetto
http://www.ocforums.com/attachment.php? ... 1243964738
http://www.ocforums.com/attachment.php? ... 1243964738
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
Ok I have dremeled the grills in my case. however there is still a noise when the fan is approached towards the opening. is this because air is sucked in from the sides as well as the front of the fan? or is it because my hole isnt big enough?
Need help ASAP as I am going to continue to dremel tomorrow
Need help ASAP as I am going to continue to dremel tomorrow
It should be noise generated by the air sucked in through the side holes in the front plate.syrian_gamer wrote:... however there is still a noise when the fan is approached towards the opening. is this because air is sucked in from the sides as well as the front of the fan? or is it because my hole isnt big enough?
As I noted before, these are a restriction. Make them more and/or larger to reduce the restriction.
To get rid of that noise totally you'll either have to reduce the air flow (fan speed) or remove the entire front cover.
Cheers
Olle
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
There are no more grills what so ever. I have removed everything and all that remains is simply a gaping hole where the intake and exhaust was.Olle P wrote:It should be noise generated by the air sucked in through the side holes in the front plate.syrian_gamer wrote:... however there is still a noise when the fan is approached towards the opening. is this because air is sucked in from the sides as well as the front of the fan? or is it because my hole isnt big enough?
As I noted before, these are a restriction. Make them more and/or larger to reduce the restriction.
To get rid of that noise totally you'll either have to reduce the air flow (fan speed) or remove the entire front cover.
Cheers
Olle
When my fan is simply on my desk, it barely makes any noise. When its near an opening, it starts making a noise. Is there any way I can eliminate the noise as much as possible?
(I am aware that having a front cover will reduce air flow, however it shouldnt impact noise dramatically. I also have a fan controller, but Im testing the noise at higher rpms)
What does it sound like? High or low frequency?syrian_gamer wrote:When its near an opening, it starts making a noise. Is there any way I can eliminate the noise as much as possible?
My guess is that the air moving fast at the edges of the openings become turbulent and thus create noise.
A possible sub-variety on that is that air is drawn at high speed along the case wall around the opening.
Both of these should more or less disappear if you hold the fan directly against the case and/or enlarge the openings further. You could use some silicone frame to seal the gap between the fan and case while keeping mechanical noise from the fan at a minimum.
Cheers
Olle
-
- Posts: 74
- Joined: Wed Jan 21, 2009 10:58 am
- Location: Montreal
-
- Posts: 12
- Joined: Sun Jul 05, 2009 4:52 pm
- Location: San Diego
oops ...I wasn't fast enough with my reply...for others out try this before firing up the dremel:
You can get a big improvement in the loudness and character of the noise of the rear chassis fan. Put a 2.5 cm (1 inch) duct in between the fan and the chassis grill to give the turbulent air coming off of the the fan blades time to moderate before hitting that nasty cheap steel stamping grill. The easiest way to make this duct is to cut out the guts of a surplus 120mm fan. Next you can use a fan like the Scythe Gentle Typhoon 120mm 1,150rpm Silent Case Fan. This fan pushes the same amout of air as a 800 rpm fan and is the same loudness as a 800 rpm fan but the character of the noise is much improved.
You can get a big improvement in the loudness and character of the noise of the rear chassis fan. Put a 2.5 cm (1 inch) duct in between the fan and the chassis grill to give the turbulent air coming off of the the fan blades time to moderate before hitting that nasty cheap steel stamping grill. The easiest way to make this duct is to cut out the guts of a surplus 120mm fan. Next you can use a fan like the Scythe Gentle Typhoon 120mm 1,150rpm Silent Case Fan. This fan pushes the same amout of air as a 800 rpm fan and is the same loudness as a 800 rpm fan but the character of the noise is much improved.