Scythe 120mm Gentle Typhoon, 1150rpm: start-up voltage?

Control: management of fans, temp/rpm monitoring via soft/hardware

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
Wilhelm-Tell
Posts: 169
Joined: Sat Aug 21, 2004 9:24 am
Location: Earth

Scythe 120mm Gentle Typhoon, 1150rpm: start-up voltage?

Post by Wilhelm-Tell » Fri Jan 15, 2010 3:25 pm

Does anyone know it? I was thinking of using this fan in my PSU.




Image
Top
Wayne Redpath
Posts: 104
Joined: Wed Jul 29, 2009 7:42 am
Location: Calgary, Alberta, Canada

Post by Wayne Redpath » Fri Jan 15, 2010 6:52 pm

Take a look at this test:

http://www.xbitlabs.com/articles/cooler ... html#sect0
Top
Wilhelm-Tell
Posts: 169
Joined: Sat Aug 21, 2004 9:24 am
Location: Earth

Post by Wilhelm-Tell » Sat Jan 16, 2010 2:20 am

Thanks.

4.5V, then I can't use it in my CX400W... It starts the fan at 4.1V
Top
Parappaman
Posts: 419
Joined: Mon Aug 31, 2009 12:30 am
Location: Italy

Post by Parappaman » Sat Jan 16, 2010 2:33 am

I think you can go with the 1450 RPM version and still not hear it. :wink:
Top
Post Reply

Return to “Fans and Control”