Good 120mm fan replacement for Fortron 350W?

PSUs: The source of DC power for all components in the PC & often a big noise source.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar

Post Reply
Posts: 7
Joined: Sat Oct 02, 2004 5:35 pm
Location: Chicago

Good 120mm fan replacement for Fortron 350W?

Post by Killer_B » Wed Apr 06, 2005 7:29 am


I've had this particular unit for about 2 years now, and I had noticed that system temps had risen a few degrees higher than what I had normally seen in the past, I checked the airflow in the power supply-NO airflow.

Cracking it open and taking a quick peek, appears that the fan itself has physically seized up...dust buildup mostly, and a touch of pet hair.

I'd experienced no instability from this fan outage, surprisingly.

What might be a good aftermarket fan to swap with the bad one? I'd prefer something ballbearing, even if it is a touch louder than sleeve bearing--Reliability is what I'm looking for.

I know Panaflos are probably not a consideration, as they don't appear to distribute a 120x25mm fan at all. (not without heavy modification, anyway)


Posts: 539
Joined: Fri Apr 04, 2003 6:35 am
Location: Cambridgeshire, England

Post by Mr_Smartepants » Wed Apr 06, 2005 1:06 pm

I replaced the fan in my 300W fortron with the low-speed (orange) variant of the same yate loon fan installed in your 350 with excellent results. I suppose you could try with the same fan as mine or Papst FGL. I hear coolermaster makes a nice cheap alternative as well.
[size=75][url=]Sonata (foamed)Bezel mod[/url]
Seasonic S12-330, 2x120mm Yate Loon D12SL-12@1000RPM, P4-2.6C w/PAL8942 80mm L1A@10v, 1GB Mushkin DDR400, ATI 9800Pro 128MB w/ZM80A, Samsung SATA 160Gb

Post Reply