Another SPCR recommended list: Cases

Want to talk about one of the articles in SPCR? Here's the forum for you.
Erssa
Posts: 1421
Joined: Sat Mar 12, 2005 9:26 pm
Location: Finland

Post by Erssa » Tue Nov 08, 2005 7:42 pm

I was just thinking that this recommended list would prolly need some updates now that SPCR has done those damn fine reviews on P150 and P180.

sgent
Posts: 16
Joined: Mon Nov 07, 2005 6:47 pm

Also

Post by sgent » Wed Nov 09, 2005 7:23 am

I'm not sure if the FK is even available in the US -- I wasn't able to find it listed anywhere.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Wed Nov 09, 2005 11:53 am


Rusty075
SPCR Reviewer
Posts: 4000
Joined: Sun Aug 11, 2002 3:26 pm
Location: Phoenix, AZ
Contact:

Re: Also

Post by Rusty075 » Wed Nov 09, 2005 12:32 pm

sgent wrote:I'm not sure if the FK is even available in the US -- I wasn't able to find it listed anywhere.
You can order it directly from FKi, as of a month ago the price was actually less than it used to be when you could buy it retail. Fk has started targeting the SI market more than the retail.

ChiBOY83
Posts: 116
Joined: Wed Jan 05, 2005 1:46 pm

Post by ChiBOY83 » Wed Nov 09, 2005 12:54 pm

my only gripe is that picture at the top of the first page....THAT PICTURE DOES NOT MAKE ANY SENSE, becuase i can't discern what anything on it is... i mean, im assumin its sposed to be a creakout of a case and air flow arrows...but it is just a HORRIBLE ILLUSTRATION....hehe

Tibors
Patron of SPCR
Posts: 2674
Joined: Sun Jul 04, 2004 6:07 am
Location: Houten, The Netherlands, Europe

Post by Tibors » Wed Nov 09, 2005 3:06 pm

The comment about the Acousti Products AC C6607 doesn't make any sense with this new revision. It references the row above it, but with the last revision that row is no longer there.

(Yes, I know what you mean, but I am not someone who read that article for the first time.)

Beyonder
Posts: 757
Joined: Wed Sep 11, 2002 11:56 pm
Location: EARTH.

Post by Beyonder » Wed Nov 09, 2005 3:18 pm

One quick typo regarding the recent update: the link for the Antec P150 on page 2 (the one in the left column) links to the wrong article.

looks nice, other than that.

hmsrolst
*Lifetime Patron*
Posts: 427
Joined: Sun Aug 11, 2002 3:26 pm
Location: Arlington, VA USA

Post by hmsrolst » Wed Nov 09, 2005 5:26 pm

Very nice update.

One small qualification regarding the SilverStone SST-LC04 which it says has no room to suspend the hard drive. With an MATX mobo it's very easy to do it. I just placed it to the left of the mobo in front of the 80mm intake on two sorbothane strips. It gets good cooling there too.

PositiveSpin
Posts: 137
Joined: Sat Jul 24, 2004 5:03 am

Post by PositiveSpin » Wed Nov 09, 2005 7:25 pm

I really like the latest version of this article - lots of information packed into an article that's short enough that no one has an excuse not to read it.

There's an amusing omission in the Yeong Yang "Mars" description: "very 120mm grills front and back for great airflow." Not sure how a grille can be "very 120mm". May I suggest inserting "open"?

I hate waiting, but the Antec P150 hasn't arrived in Australia yet...

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Wed Nov 09, 2005 10:27 pm

OK, little corrections made.

charger2000
Posts: 77
Joined: Fri Nov 19, 2004 4:41 am
Location: Italy
Contact:

Post by charger2000 » Thu Nov 10, 2005 7:23 am

good revision

on page 2 the link above the picture of the Silverstone LC04 refering to a LC11, actually links to the review of the LC01 :o

sun.moon
Posts: 174
Joined: Wed Sep 21, 2005 5:57 am
Location: Germany

Post by sun.moon » Fri Nov 11, 2005 2:47 am

Nice reading, even for the third time now!

@MikeC: found two small typos:

CAVITY RESONANCE

One poorly understand aspect of PC noise is cavity resonance. The air in any mostly enclosed box or space exhibits one or more resonances centered at certain frequency points. Any noise that falls close to these resonance points become accentuated and amplified. Note that this does not have to do with any panle vibration at all, but the vibration of the air in the cavity — hence the term cavity resonance. A good explanation of resonance concepts, including cavity resonance, is available from this page at the Sound and Hearing section of the HyperPhysics web site.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri Nov 11, 2005 10:47 am

More typo & link corrections made. LC11 pic now in place...

sthu
Posts: 4
Joined: Wed Feb 22, 2006 8:24 am
Location: Canada

will these do

Post by sthu » Sun Feb 26, 2006 11:29 am

[quote="cyberknight"]that's cuz Antec cases are easily accessible.

it's really hard to find a decent case that isn't a CoolerMaster or Antec in Canada[/quote]

There are many custom enclosure manufacturer in Canada. I like Protocase [ http://www.protocase.com ]. But you need to provide your details [like enclosure design in CAD format], and they will make it. I tried quiet a few time, and it works out damn well. Don't want to hang over to the off-the-self cases and compromise my design, when i can get what i want.

Some other case manufacturer in Canada:

http://www.ctidirectory.com/search/prod ... de=2751600

qviri
Posts: 2465
Joined: Tue May 24, 2005 8:22 pm
Location: Berlin
Contact:

Post by qviri » Mon Aug 21, 2006 3:29 pm

Hi guys, I just re-read the article based on the link on the front page. A couple of notes:

Page 1 says "Antec P180 breaks new ground in many ways..." I think that should be changed to "broke new ground"... P180 is not really new, and the feature mentioned specifically ("independent thermal zones for improved cooling of all components") is now available in a couple of other cases.

On Page 2, the table in the Media PC section says "On desktop next to monitor on on floor under / beside desk". I'm pretty sure that was supposed to be "or on floor".

Also, the Centurion 5 as sold now (at least on Newegg and at NCIX... probably also the others) comes without a PSU. The rear fan grill also changed for the better since the review (see newegg picture), but that's off-topic.

Personally, I'd remove the " (!!) " from SLK3700AMB's description on page three (the 120 mm fans, which the emphasis refers to, are a pretty common feature these days), but that's up to you.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Mon Aug 21, 2006 4:27 pm

qviri -- thanks for your comments re- the Aug 17/06 update of this article. Most changes made... along with a few other tweaks.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri Nov 16, 2007 8:47 am

Updated a few times this year, the latest being Nov 16, 2007.

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

Post by NeilBlanchard » Fri Nov 16, 2007 10:20 am

Hi Mike,

What about adding the Sonata Designer 500 (or whatever it is called) to the P150/Solo?

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri Nov 16, 2007 10:55 am

NeilBlanchard wrote:Hi Mike,

What about adding the Sonata Designer 500 (or whatever it is called) to the P150/Solo?
right -- done.

maalitehdas
Posts: 166
Joined: Tue May 27, 2008 12:04 am
Location: Finland

Post by maalitehdas » Tue May 27, 2008 12:15 am

Hello Mike

I'd be interested to read some results about NEW CASES in the market, like
- antec P190
- nexus (all models)
- Lian-Li PC201B / S-80

It would also be interesting to have a comparisation of noise levels with the cheapest (not silent) ATX-midi case in the market, WT-FL07

kittle
*Lifetime Patron*
Posts: 336
Joined: Thu Nov 09, 2006 4:44 pm
Location: San Jose, CA

Post by kittle » Tue May 27, 2008 2:03 pm

Ditto on the P190
Impressive looking case - but is the price tag worth it?

Ash
Posts: 116
Joined: Tue Apr 15, 2008 12:36 pm
Location: London

Post by Ash » Wed May 28, 2008 12:59 am

anyone know if antec are planning to bring out a new case in the p18x series?

kusling
Posts: 1
Joined: Wed Jun 25, 2008 10:12 am
Location: Sweden

Post by kusling » Wed Jun 25, 2008 10:18 am

there is no mention of the HFX mini in this otherwise great article :)
i think this case deserves mentioning since it's pretty unique

LAThierry
Posts: 95
Joined: Tue Nov 14, 2006 4:15 pm
Location: Los Angeles, California

Post by LAThierry » Fri Jan 29, 2010 10:43 am

I was hoping for a more updated list of recommended cases.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri Jan 29, 2010 10:51 am

LAThierry wrote:I was hoping for a more updated list of recommended cases.
It's coming. Meanwhile, just go through the recent reviews.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Wed Apr 07, 2010 10:35 am


psyopper
Friend of SPCR
Posts: 336
Joined: Fri Mar 28, 2008 1:15 pm
Location: Portland, Oregon

Post by psyopper » Wed Apr 07, 2010 12:03 pm

Nice update, thanks!

One question... On the page 6 / current cases you list volume in litres as a reference to size (nice!) but don't show a rating for noise and airflow. On the page 7 (retired cases) you do show ratings for noise and airflow.

It would be nice to see a rating on the current cases to show noise and airflow... :) I really don't care how a case I can no longer buy performs, but it would be helpful to be able to compare cases that I may be buying in the future.

Olaf van der Spek
Posts: 434
Joined: Tue Oct 04, 2005 6:10 am

Post by Olaf van der Spek » Wed Apr 07, 2010 1:23 pm

Even in a very low power system, eliminating all forced airflow usually shortens component life.
Is there any proof for this?

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Wed Apr 07, 2010 2:00 pm

Olaf van der Spek wrote:
Even in a very low power system, eliminating all forced airflow usually shortens component life.
Is there any proof for this?
I'm not sure that's there's any definitive study which "proves" this, but I can vouch from personal experience that very low/no airflow PCs do tend to break sooner. For more info, just go through some electronics/thermal documentation sites. Try, for example, a search on Tony Kordyban.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Wed Apr 07, 2010 2:13 pm

psyopper wrote:Nice update, thanks!

One question... On the page 6 / current cases you list volume in litres as a reference to size (nice!) but don't show a rating for noise and airflow. On the page 7 (retired cases) you do show ratings for noise and airflow.

It would be nice to see a rating on the current cases to show noise and airflow... :) I really don't care how a case I can no longer buy performs, but it would be helpful to be able to compare cases that I may be buying in the future.
We wanted to get away from this. It was too specific, and it's too dependent on chosen components and local conditions. Those things will be removed from the retired list as well. My reasons are detailed in the article:
Cases that measure within a couple of decibels of each other in our review tests don't necessarily translate to real user differences. So many other factors come into play: The ambient noise and temperature, the particular components in the case, typical usage patterns of the operator, etc. A case ranked 9 in the old system might have performed identically to one rated 8, depending on components and conditions. The fine differentiations we could make under our lab test conditions may not necessarily be heard in real use by typical users. Hence, those ranking were not always useful.

Post Reply