- 2 x Samsung SP2504C SATA
- BenQ DW1650, DVD-RW
- Antec TriCool fan
Motherboard is MSI K8NGM2-FID with integrated graphics and Athlon 64 X2 3800+ and 2x1GB DDR 400MHz. System works fine when I add some junk devices and TriCool is set on low.
Antec support reply "Try installing the cables to the power supply far away from each other. The reason why it works when adding more components is because the NeoHE requires a minimum load of 1A on all +12V rails. And by adding more components it meets the minimum requirement. Please let me know if my suggestion works or not." to this NeoHE problem.
One solution could be to build a new 4-pin +12V connector: I need to find what pins from 4-pin +12V connector to connect to NeoHEs 6-pin socket or find some ATX power supply 4-pin molex connector to +12V 4-pin connector CPU power adapter. With that one could transfer +12V load to different rail.