P180 and Acoustipack
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Devonavar
-
- Posts: 1283
- Joined: Thu Aug 07, 2003 2:43 pm
- Location: Charlotte, NC, USA
P180 and Acoustipack
A while back, either here or on another forum, I saw pictures of someone appplying acoustipack or some other form of accoustic dampening material to a P180. Supposedly application was tricky due to the vibration dampening strips. Anybody know where I can find these pics?
P.S. - yes, I used the search function, no, I couldn't find it.
P.S. - yes, I used the search function, no, I couldn't find it.
-
- Posts: 1283
- Joined: Thu Aug 07, 2003 2:43 pm
- Location: Charlotte, NC, USA
...Acoustipack available for P180 @
endpcnoise shows a couple of damped options for the all-black P180:
http://www.endpcnoise.com/cgi-bin/e/p18 ... d=rbPuVFMm
Accoustipack is $110. A bit pricey, but if you need it, you need it.
http://www.endpcnoise.com/cgi-bin/e/p18 ... d=rbPuVFMm
Accoustipack is $110. A bit pricey, but if you need it, you need it.
-
- Posts: 1283
- Joined: Thu Aug 07, 2003 2:43 pm
- Location: Charlotte, NC, USA
I recieved this reply from Acousti, regarding pre-cut kit:
Thank you for your enquiry into the availabilty of a pre-cut kit for the Antec P180.
This kit is currently under development and will become available during the next few months.
I have made a record of your enquiry and will contact you as soon as the kit becomes available.
Best Regards, Derek Oliver
Service & Support Manager, Acousti Products
Tel: +44 (0)870 190 4092
Website: www.acoustiproducts.com
Thank you for your enquiry into the availabilty of a pre-cut kit for the Antec P180.
This kit is currently under development and will become available during the next few months.
I have made a record of your enquiry and will contact you as soon as the kit becomes available.
Best Regards, Derek Oliver
Service & Support Manager, Acousti Products
Tel: +44 (0)870 190 4092
Website: www.acoustiproducts.com
Excuse the bumpage.
I was also looking into a pre-cut kit and received the following reply:
Thank you for contacting Acousti Products with your enquiry into the
availability of a pre-cut kit for the Antec P180 case.
Unfortunately we will not be developing a pre-cut kit for this
particular case - if only time were permitting we would have very much
liked to have done so.
The only option currently available from Acousti Products is to custom
fit the acoustic material from one of our generic kits, the AcoustiPack
Standard or Deluxe - both of which are available from Quiet PC,
www.quietpc.com.
Kind Regards, Derek
Bit odd really, still, I'm hoping they'll make one anyway, would save me a bit of trouble and possibly a bit of frustration in case I get something wrong.
I was also looking into a pre-cut kit and received the following reply:
Thank you for contacting Acousti Products with your enquiry into the
availability of a pre-cut kit for the Antec P180 case.
Unfortunately we will not be developing a pre-cut kit for this
particular case - if only time were permitting we would have very much
liked to have done so.
The only option currently available from Acousti Products is to custom
fit the acoustic material from one of our generic kits, the AcoustiPack
Standard or Deluxe - both of which are available from Quiet PC,
www.quietpc.com.
Kind Regards, Derek
Bit odd really, still, I'm hoping they'll make one anyway, would save me a bit of trouble and possibly a bit of frustration in case I get something wrong.
Don't get your hopes up.Malvar wrote:Excuse the bumpage.
I was also looking into a pre-cut kit and received the following reply:
Thank you for contacting Acousti Products with your enquiry into the
availability of a pre-cut kit for the Antec P180 case.
Unfortunately we will not be developing a pre-cut kit for this
particular case - if only time were permitting we would have very much
liked to have done so.
The only option currently available from Acousti Products is to custom
fit the acoustic material from one of our generic kits, the AcoustiPack
Standard or Deluxe - both of which are available from Quiet PC,
www.quietpc.com.
Kind Regards, Derek
Bit odd really, still, I'm hoping they'll make one anyway, would save me a bit of trouble and possibly a bit of frustration in case I get something wrong.
Was it this post, Heavy absorption, more gave less temperature.
Sorry for resurrecting this thread if it wasn't.
Sorry for resurrecting this thread if it wasn't.
Here is a thread, made by the original poster, Shadowknight, himself, describing his project involving Acousti-Pack Deluxe V2 and the Antec P180. It's same as the link found in his sig.
Also, I too e-mailed and received the following response, dated April 25th 06.
~ Kris
Also, I too e-mailed and received the following response, dated April 25th 06.
So it would seem we have multiple indications of a pre-cut kit not appearing.Thank you for contacting Acousti Products with your enquiry into a pre-cut kit for the Antec P180.
Although we know that there is a high demand for this kit we are presently unable to give any indication of when this product will be produced, if at all.
We are sorry for any inconvenience that this may be causing and can only suggest that you utilise one of the generic AcoustiPack kits (AcoustiPack standard/Deluxe) and adapt this to the P180 case for the time being.
For more information on our range of Acoustic materials please visit: http://www.acoustiproducts.com/en/multi ... erials.asp
Kind Regards, Derek
~ Kris
Heh, it's been so long I don't remember if it was that one!len509 wrote:Was it this post, Heavy absorption, more gave less temperature.
Sorry for resurrecting this thread if it wasn't.
Nice post, though - thanks!