How much will a 300w power supply run?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee, Devonavar
200W Enhance power supply, 2.8 P4 HT, 2x512 DDR 400, 7200 RPM WD HDD, ATI 9600 (AGP), Asus 16X DVDROM, PCI Wireless NIC (IDEQ 210M)
300W Antec true power, 1.4 Athlon Tbird, 7200 RPM IBM HDD, 2X 512 PC 133, 16X DVDROM, TI 4600 (NOW) (Asus A7V133)
300W Antec True Power, Athlon64 3200+, 2 x 512 DDR, Samsung SP2504C, ATI 9200, 16X ASUS DVDROM, 16X Sony DVDRW (THEN) Asus K8VSED
350W Antec Smart Power, Athlon64 3200+, 2 x 512 DDR, Samsung SP2504C, 6800GS 256MB AGP, 16X ASUS DVDROM, 16X Sony DVDRW (NOW) Asus K8VSED
300W Antec is the same power supply, moved it to my son's PC, because it was quiet. Please note, a Smart Power is nowhere near as quiet as a True Power (live and learn.)
Andy
300W Antec true power, 1.4 Athlon Tbird, 7200 RPM IBM HDD, 2X 512 PC 133, 16X DVDROM, TI 4600 (NOW) (Asus A7V133)
300W Antec True Power, Athlon64 3200+, 2 x 512 DDR, Samsung SP2504C, ATI 9200, 16X ASUS DVDROM, 16X Sony DVDRW (THEN) Asus K8VSED
350W Antec Smart Power, Athlon64 3200+, 2 x 512 DDR, Samsung SP2504C, 6800GS 256MB AGP, 16X ASUS DVDROM, 16X Sony DVDRW (NOW) Asus K8VSED
300W Antec is the same power supply, moved it to my son's PC, because it was quiet. Please note, a Smart Power is nowhere near as quiet as a True Power (live and learn.)
Andy
heh.
check this out:
http://episteme.arstechnica.com/eve/for ... 0001491831
300w fortran psu:
"Regardless, this is a beautiful machine, and now we know that a 300W single-fan PSU can power a rig with an nVidia GeForce 8800GTS, Intel E6600 CPU, Seagate 7200.10 HDD, Plextor SATA DVD Burner, Creative X-fi sound card, 4 fans, and 2 gigs of Mushkin PC-5300. Pretty slick."
check this out:
http://episteme.arstechnica.com/eve/for ... 0001491831
300w fortran psu:
"Regardless, this is a beautiful machine, and now we know that a 300W single-fan PSU can power a rig with an nVidia GeForce 8800GTS, Intel E6600 CPU, Seagate 7200.10 HDD, Plextor SATA DVD Burner, Creative X-fi sound card, 4 fans, and 2 gigs of Mushkin PC-5300. Pretty slick."
See my .sig
Both systems are running on Seasonic S12-330 PSUs (which is 10% greater output than what you are asking, but it's close).
I'm sure when I upgrade my desktop from an Opteron 144 to an Opteron 175 (this month) I'll have no issues with power. Heat, on the other hand...
-Derek
I'm sure when I upgrade my desktop from an Opteron 144 to an Opteron 175 (this month) I'll have no issues with power. Heat, on the other hand...
-Derek
-
- Posts: 2
- Joined: Mon Jul 24, 2006 12:36 pm
- Location: new zealand
- Contact:
new card and upgraded broardband
MSI KT266 Pro2-U with a XP2000 @ 1847 at 44c 160 FSB 1.65v
Albatron Geforce FX 5200 LPX 128mb
overclocked so much that you would not want to know!
Two 52 24 52x cdwrighters and a dvd combo exturnal
256x2 ddr333 and a ddr400 at 321mhz 11.5 multiplier
ultimit hardrive cooler with one hardrive partitioned too four drives
bios update
Nine fans
air conditioning New Zealand New
very hard to get saitek p880 died though ;,-9
15inch 120hurtz monitor through 200W Tv cabnet mounted AT POWER SUPPLY UNIT
Cap Card for decoading sky
300 W PSU
as fast as my line goes broardband flatrate
UNemployed
rumigine for an upgrade
Albatron Geforce FX 5200 LPX 128mb
overclocked so much that you would not want to know!
Two 52 24 52x cdwrighters and a dvd combo exturnal
256x2 ddr333 and a ddr400 at 321mhz 11.5 multiplier
ultimit hardrive cooler with one hardrive partitioned too four drives
bios update
Nine fans
air conditioning New Zealand New
very hard to get saitek p880 died though ;,-9
15inch 120hurtz monitor through 200W Tv cabnet mounted AT POWER SUPPLY UNIT
Cap Card for decoading sky
300 W PSU
as fast as my line goes broardband flatrate
UNemployed
rumigine for an upgrade
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Icute 350W...
No problems with:
ICUTE 350w bundled PSU
Athlon XP 2500+ OC'd to 3200+ (2.2GHz)
Akasa BlueLED Cooler @ 3750RPM
MSI MS-6570E K7N2-Delta2 FSR (nForce 2 Ultra 400)
MSI NorthBridge Fan @ 4000RPM
PNY Geforce 6600 128MB 64-Bit
2x Maxtor DiamondMax9 6Y080L0 7200RPM IDE UltraDMA
1x TSST DVD-RW Ts-H552U 16x
1x JLMS XJ-HD165H DVD-ROM 16x
1x Panasonic Floppy Disk
1x generic sleeve bearing fan (mainboard header)
1x Icute Blue LED Fan sleeve bearing (piggyback connector)
Leadtek WinF@st TV2000/XP
Conexant 56K Voice/FAX Modem
1x Intel Pro/100+ NIC
1x DLED/USB Header [MSI]
2x Samsung DDR400 DualChannel RAM @ 200MHz
[Temporarily: 1x Maxtor 4D040H2 40GB 5400RPM)
GPU OC'd from 300MHz/500MHz to 430MHz/630MHz
CPU OC'd from FSB166/Clock 1833MHz to FSB200/2200MHz Multiplier 11
PS> Is the current PSU sufficient if i use it for a Core 2 duo rig with almost every other component above + a 775Dual-Vsta Mobo and replace the 2 HDDs with a WD1600JS?
ICUTE 350w bundled PSU
Athlon XP 2500+ OC'd to 3200+ (2.2GHz)
Akasa BlueLED Cooler @ 3750RPM
MSI MS-6570E K7N2-Delta2 FSR (nForce 2 Ultra 400)
MSI NorthBridge Fan @ 4000RPM
PNY Geforce 6600 128MB 64-Bit
2x Maxtor DiamondMax9 6Y080L0 7200RPM IDE UltraDMA
1x TSST DVD-RW Ts-H552U 16x
1x JLMS XJ-HD165H DVD-ROM 16x
1x Panasonic Floppy Disk
1x generic sleeve bearing fan (mainboard header)
1x Icute Blue LED Fan sleeve bearing (piggyback connector)
Leadtek WinF@st TV2000/XP
Conexant 56K Voice/FAX Modem
1x Intel Pro/100+ NIC
1x DLED/USB Header [MSI]
2x Samsung DDR400 DualChannel RAM @ 200MHz
[Temporarily: 1x Maxtor 4D040H2 40GB 5400RPM)
GPU OC'd from 300MHz/500MHz to 430MHz/630MHz
CPU OC'd from FSB166/Clock 1833MHz to FSB200/2200MHz Multiplier 11
PS> Is the current PSU sufficient if i use it for a Core 2 duo rig with almost every other component above + a 775Dual-Vsta Mobo and replace the 2 HDDs with a WD1600JS?
-
- Posts: 1
- Joined: Tue Jan 02, 2007 3:29 pm
My 2y/o Seasonic 300W Super Silencer is powering:
ASUS A8V Deluxe Socket 939 VIA K8T800 Pro
Athlon64 3000
2x 512MB DDR400
2x SATA HDD's (7200RPM)
1x DVD drive
Gigabyte GeForce 7600GS (AGP, passive heatsink)
SoundBlaster Audigy 2ZS Platinum (with the "drive")
Compro VideoMate Gold
iMon Inside
3x USB devices
Running smooth so far!
ASUS A8V Deluxe Socket 939 VIA K8T800 Pro
Athlon64 3000
2x 512MB DDR400
2x SATA HDD's (7200RPM)
1x DVD drive
Gigabyte GeForce 7600GS (AGP, passive heatsink)
SoundBlaster Audigy 2ZS Platinum (with the "drive")
Compro VideoMate Gold
iMon Inside
3x USB devices
Running smooth so far!
Samsung says their T series SATA drives do staggered spinup,but I did not look for how it's set up.shunx wrote:Some questions:Jan Kivar wrote:HDs consume the most power when they spin up. That's why SCSI allows staggered spinup (HBA starts the drives).
1) about how much current is on the 12V when a HD (say, a 7200.7) spin up?
2) which controllers if any allow for staggered spinup for ATA and SATA drives?
i used to have a stock aopen 300w psu that came with a q50c that was used with:
p4 northwood 3000 stock cooler
gigabyte atx i965 motherboard
2 sticks pc6400 512mb dual
2 80 cm generic cooling fans
1 ati 9600
1 120gb seagate hd
1 floppy drive
1 dvdrw and dvd rom
2 avg pci cards
the funny thing was that whenever someone turned off the exhaust fan for the shower in the bathroom, the system would freeze, then reset. was pretty annoying. after changing the psu to a stock 400w in another case, no further problems... not enough wattage or dodgy 300w psu?
p4 northwood 3000 stock cooler
gigabyte atx i965 motherboard
2 sticks pc6400 512mb dual
2 80 cm generic cooling fans
1 ati 9600
1 120gb seagate hd
1 floppy drive
1 dvdrw and dvd rom
2 avg pci cards
the funny thing was that whenever someone turned off the exhaust fan for the shower in the bathroom, the system would freeze, then reset. was pretty annoying. after changing the psu to a stock 400w in another case, no further problems... not enough wattage or dodgy 300w psu?
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
-
- Posts: 347
- Joined: Tue Jun 03, 2003 12:57 am
Re: Icute 350W...
be careful! iCute PSUs are made by CWT and those seem to be the lowest grade of them all. There're always stories of exploding iCute PSUs.Piri wrote:No problems with:
ICUTE 350w bundled PSU
[img]http://img152.imageshack.us/img152/92/dscf3624tw2.jpg
PS> Is the current PSU sufficient if i use it for a Core 2 duo rig with almost every other component above + a 775Dual-Vsta Mobo and replace the 2 HDDs with a WD1600JS?
-
- Posts: 347
- Joined: Tue Jun 03, 2003 12:57 am
Fortron Bluestorm FSP350-THN-P fanswapped
AMD Athlon64 X2 3600+ (Windsor, 10x210MHz, 1.075v)
Abit NF-M2 nView (integrated GF6150)
2 x 1GB Kingston ValueRAM DDR2-667 (350MHz, 1.9v)
LG GSA-H42N DVDRAM, BenQ DW1655 DVDRW
Seagate BIV 80gb, Samsung P80 160GB (2x Abit Serillel 2 convertors)
SB Audigy
Misc
2xD12SL-12 (5v, 6v) + ATN-TP-02E fan controller
MS Wireless Desktop 3000 + Logitech Rumblepad 2
DLink BT-122 dongle
Parallel -> USB convertor
full details of rig in my sig. Gonna add a TV card and new VGA in the near future. Probably a 7900GS or a 8800GTS (!!)
AMD Athlon64 X2 3600+ (Windsor, 10x210MHz, 1.075v)
Abit NF-M2 nView (integrated GF6150)
2 x 1GB Kingston ValueRAM DDR2-667 (350MHz, 1.9v)
LG GSA-H42N DVDRAM, BenQ DW1655 DVDRW
Seagate BIV 80gb, Samsung P80 160GB (2x Abit Serillel 2 convertors)
SB Audigy
Misc
2xD12SL-12 (5v, 6v) + ATN-TP-02E fan controller
MS Wireless Desktop 3000 + Logitech Rumblepad 2
DLink BT-122 dongle
Parallel -> USB convertor
full details of rig in my sig. Gonna add a TV card and new VGA in the near future. Probably a 7900GS or a 8800GTS (!!)
-
- Posts: 347
- Joined: Tue Jun 03, 2003 12:57 am
I tried convincing hardware experts that a C2D or X2 (65w EE) system requires less power than a comparable Prescott/Presler system, yet I keep getting big PSU recommendations shoved down my throat. The best part is almost everyone knows recent processors are less power hungry, yet PSU wattage recommendations are getting bigger and bigger. It's senseless.Ralf Hutter wrote:GamingGod wrote:Everytime I read this thread the overclockers on other forums piss me off more and more. Its gotten even worse now, everyone is recommeneding at least a 450w power supply for an average (fairly high end) gaming system. I always say, just get a decent 300w and youll be fine and I get my head chewed off.
-
- Site Admin
- Posts: 12285
- Joined: Sun Aug 11, 2002 3:26 pm
- Location: Vancouver, BC, Canada
- Contact:
Here's one from the updated REAL SYSTEM POWER REQUIREMENTS table of the Power Supply Fundamentals article:
Driven with a Seasonic SS-350ET ATX PSU --
Intel Pentium D950, overclocked / overvolted 10% (Presler, 3.74GHz)
ATI Radeon X1950XTX-512 PCIe graphics
Asus P5LD2-VM motherboard
4 x 1024MB Corsair DDR2-6400 RAM
Hitachi Deskstar 7K80 80GB hard drive
WD Raptor WD1500ADFD 150GB 10krpm HDD
1 x 120mm fan
Total AC power draw is an absolute max of 298W; estimated DC power draw is 256W. It could actually be driven by an honestly rated 300W PSU.
Driven with a Seasonic SS-350ET ATX PSU --
Intel Pentium D950, overclocked / overvolted 10% (Presler, 3.74GHz)
ATI Radeon X1950XTX-512 PCIe graphics
Asus P5LD2-VM motherboard
4 x 1024MB Corsair DDR2-6400 RAM
Hitachi Deskstar 7K80 80GB hard drive
WD Raptor WD1500ADFD 150GB 10krpm HDD
1 x 120mm fan
Total AC power draw is an absolute max of 298W; estimated DC power draw is 256W. It could actually be driven by an honestly rated 300W PSU.
Default AOpen PSU 300 watt Model no : fsp300-60bt(pf) (came with AOpen high tower)
Athlon xp2800+ (trbred b)
768mb ram (3x 256mb ddr)
asus a7v8x-x
geforce fx5600
creative live 1024
pinnacle pctvpro
3com 100mbit nic.
promise ultra 133tx2
WD 120gb hdd
Seagate 40gb.
Seagate 4gb (backup)
pioneer dvdrom
pioneer dvd-rw
liteon cdrw
3 case-fan's
2 harddisk coolers with 2 4cm fan's (those horrible noise makers)
It did run for years without a flaw
Athlon xp2800+ (trbred b)
768mb ram (3x 256mb ddr)
asus a7v8x-x
geforce fx5600
creative live 1024
pinnacle pctvpro
3com 100mbit nic.
promise ultra 133tx2
WD 120gb hdd
Seagate 40gb.
Seagate 4gb (backup)
pioneer dvdrom
pioneer dvd-rw
liteon cdrw
3 case-fan's
2 harddisk coolers with 2 4cm fan's (those horrible noise makers)
It did run for years without a flaw
-
- Posts: 152
- Joined: Sat Jul 23, 2005 4:15 pm
- Location: Montréal, Québec
- Contact:
OK so I've been using my Optiplex GX 240 Dell machine for mainly being a college PC. I've graduated so now I use it for web surfing, games used to video edit and 3D Render. Will most likely play more games lol and 3D Render being a Game Art & Design student online with the Art Institute.
Just the other day my video card's fan stopped turning (been loud a while now so I knew the day would come) so I sent it into support even though I forgot to register the product. I said what the heck well I got back a X1600 AGP 512MB video card and I sent in a Radeon 9800 Pro 256MB! Ok, me likey.
I was excited so I removed the drivers of the old card, unplugged spare 9500 card and plugged her in and started up the computer. Got a beep, the video card fan was turning along with case fan and nothing happened and I just watched the monitor's LED light blink on and off. I also have three green leds in the back and one yellow, which is the A LED, the first one but I don't have my manuel so I don't know exactly what it means. Many people say the X1600 is a power hog and I believe the dell computer is a standard 300W but I don't really know for sure.
My system:
p4 2.0Ghz
1GIG SDRAM
ATI X1600 512
ATI Wonder TV Tuner
Audigy 2 ZS Gamer
USB 2.0 Card
1 x 92mm case fan
2 x 80 GIG ATA HDDs
Zip Drive
Floppy Drive
DVD/CD Burner/Writer Combo Drive
LED Temp/Fan Control Panel (mainly used to see if fan is running and temp)
2 USB ports in front
If I need to upgrade to a new PSU I found one at pcpower (since Dell forums said they have a compatibility list), the Silencer 410 Dell-2 Upgrade PS works with the GX240.
I like the quiet part as the original PSU I have now is very quiet, I'd like to keep it that way. However 107 bucks is a lot for a 410W Power Supply and I read on here that I could fry my board if I went with a different PSU which isn't compatible with my system so I might be forced to go with that one. So thats me...
Just the other day my video card's fan stopped turning (been loud a while now so I knew the day would come) so I sent it into support even though I forgot to register the product. I said what the heck well I got back a X1600 AGP 512MB video card and I sent in a Radeon 9800 Pro 256MB! Ok, me likey.
I was excited so I removed the drivers of the old card, unplugged spare 9500 card and plugged her in and started up the computer. Got a beep, the video card fan was turning along with case fan and nothing happened and I just watched the monitor's LED light blink on and off. I also have three green leds in the back and one yellow, which is the A LED, the first one but I don't have my manuel so I don't know exactly what it means. Many people say the X1600 is a power hog and I believe the dell computer is a standard 300W but I don't really know for sure.
My system:
p4 2.0Ghz
1GIG SDRAM
ATI X1600 512
ATI Wonder TV Tuner
Audigy 2 ZS Gamer
USB 2.0 Card
1 x 92mm case fan
2 x 80 GIG ATA HDDs
Zip Drive
Floppy Drive
DVD/CD Burner/Writer Combo Drive
LED Temp/Fan Control Panel (mainly used to see if fan is running and temp)
2 USB ports in front
If I need to upgrade to a new PSU I found one at pcpower (since Dell forums said they have a compatibility list), the Silencer 410 Dell-2 Upgrade PS works with the GX240.
I like the quiet part as the original PSU I have now is very quiet, I'd like to keep it that way. However 107 bucks is a lot for a 410W Power Supply and I read on here that I could fry my board if I went with a different PSU which isn't compatible with my system so I might be forced to go with that one. So thats me...
-
- Posts: 92
- Joined: Tue May 29, 2007 9:25 am
- Location: Norway
Got an old system running in an AOpen case w/a 300W PSU, delivers 13A on 12V. The PSU is marked "Component Pro" in big letters, haven't heard the name before tho.
Specs:
MSI i865PE motherboard
P4 - 2.4B GHz (Northwood, 533 MHz FSB)
2x512+2x256MB RAM (@ PC2700 speed)
1x80GB Samsung HDD
ATI Radeon 9600 256MB
NEC 16x dual layer DVD burner.
Runs stable, I reckon it can take the GeForce 6600GT I have in my spare component box.
And yes, there are places I go, where people are buying 700-900W PSUs to power middle class gaming systems. Trying to tell them that that's way over what they'd ever need, I'm just ignored and they go ahead with the purchase anyways.
Specs:
MSI i865PE motherboard
P4 - 2.4B GHz (Northwood, 533 MHz FSB)
2x512+2x256MB RAM (@ PC2700 speed)
1x80GB Samsung HDD
ATI Radeon 9600 256MB
NEC 16x dual layer DVD burner.
Runs stable, I reckon it can take the GeForce 6600GT I have in my spare component box.
And yes, there are places I go, where people are buying 700-900W PSUs to power middle class gaming systems. Trying to tell them that that's way over what they'd ever need, I'm just ignored and they go ahead with the purchase anyways.
another 300W psu powered pc
PSU: 300W DTK PTP-3007
CPU: Athlon XP-M (mobile barton) 2600+, 200x11.5=2300mhz @ 1.625v
MB: MSI K7N2 delta-L (MS-6570)
RAM: 512MB 400mhz
GFX: MSI GF5200 AGP 128mb
HDD1: Maxtor 6Y160P0
HDD2: Maxtor 4K080H4
CD-RW: Teac W540E
PCI1: Soundblaster Live! Platinum (with front bay)
PCI2: M-Audio Audiophile 24/96
FAN1: Thermaltake Silent Boost cpu cooler fan 8cm (1.56W)
FAN2: Thermaltake 9cm case fan TT9025A (2.64W)
FAN3: HDD cooling fan Evercool SHDC-A (2.04W)
FAN3: a small ~1W fan
CPU: Athlon XP-M (mobile barton) 2600+, 200x11.5=2300mhz @ 1.625v
MB: MSI K7N2 delta-L (MS-6570)
RAM: 512MB 400mhz
GFX: MSI GF5200 AGP 128mb
HDD1: Maxtor 6Y160P0
HDD2: Maxtor 4K080H4
CD-RW: Teac W540E
PCI1: Soundblaster Live! Platinum (with front bay)
PCI2: M-Audio Audiophile 24/96
FAN1: Thermaltake Silent Boost cpu cooler fan 8cm (1.56W)
FAN2: Thermaltake 9cm case fan TT9025A (2.64W)
FAN3: HDD cooling fan Evercool SHDC-A (2.04W)
FAN3: a small ~1W fan
Can I upgrade my video?
Here's what I have powered by SeaSonic SUPER SILENCER-300W ATX12V Power Supply:
AMD Athlon 64 X2 4200+ 2.2GHz
ASRock 939Dual-SATA2 Motherboard
2x Crucial 512MB RAM
ATI Radeon 9600 All-in-Wonder Video Card (fanless)
Sound Blaster X-Fi Sound Card
Pioneer 16X DVD±R DVD Burner DVR-111D
SAMSUNG SP2504C 250GB 7200 RPM
SAMSUNG SP1614C 160GB 7200 RPM
Never had any trouble. Here's a question, tho:
Under the specification for the Radeon X1950 Pro video card I am interested in it says:
http://ati.amd.com/products/radeonx1950 ... specs.html
It looks like the fanless X1950 PRO (PowerColor SCS3) is pretty hard to find for sale, but I would like more video power without adding a fan.
AMD Athlon 64 X2 4200+ 2.2GHz
ASRock 939Dual-SATA2 Motherboard
2x Crucial 512MB RAM
ATI Radeon 9600 All-in-Wonder Video Card (fanless)
Sound Blaster X-Fi Sound Card
Pioneer 16X DVD±R DVD Burner DVR-111D
SAMSUNG SP2504C 250GB 7200 RPM
SAMSUNG SP1614C 160GB 7200 RPM
Never had any trouble. Here's a question, tho:
Under the specification for the Radeon X1950 Pro video card I am interested in it says:
http://ati.amd.com/products/radeonx1950 ... specs.html
Seasonic rates the SS-300W to 18A on 12V1, and the 350W to 19A. Judging by the system Mike posted with the X1950 XTX being run by the Seasonic SS-350W, can I discount this 'requirement'?Connection to the system power supply is required:
* 450-Watt power supply or greater, 30 Amps on 12 volt rail recommended (assumes fully loaded system)
It looks like the fanless X1950 PRO (PowerColor SCS3) is pretty hard to find for sale, but I would like more video power without adding a fan.
-
- Moderator
- Posts: 7681
- Joined: Mon Dec 09, 2002 7:11 pm
- Location: Maynard, MA, Eaarth
- Contact:
Greetings,
Fortron Source 300watt "Green" PSU had no troubles with:
Intel Core2Duo 6420 2.13gHz @ 20% OC = 2.56gHz
2X 1GB Corsair DDR SDRAM 533
Asus P5N-E SLi
Gigabyte 8600GTS
320GB Western Digital SATA HD
120GB Samsung IDE HD
20GB Western Digtal IDE HD
Sony DVD-RW
Antec 3-speed case fan (in Solo)
GlobalWin NCB (on Thermalright SI-128)
no-name PCI serial port card
Fortron Source 300watt "Green" PSU had no troubles with:
Intel Core2Duo 6420 2.13gHz @ 20% OC = 2.56gHz
2X 1GB Corsair DDR SDRAM 533
Asus P5N-E SLi
Gigabyte 8600GTS
320GB Western Digital SATA HD
120GB Samsung IDE HD
20GB Western Digtal IDE HD
Sony DVD-RW
Antec 3-speed case fan (in Solo)
GlobalWin NCB (on Thermalright SI-128)
no-name PCI serial port card
I just finished my new system (outside of needing to do some major cabling work to clean things up and some thermal work) and it's way below the 300watt threshold.
Running the following (which shows at about 180w idle/225w load at UPS load detector..which I estimate to mean about 150/190w actual power taking into account 80% efficiency)
Core 2 duo E6600 at 3.0ghz and 1.2v core
Gigabyte P35 Mobo
EVGA 7900GTO at 1.3v core
2X120mm Yate Loon
2X92mm Nexus/Scythe
Sound Blaster X-fi + Front Audio Bay
802.11g Wifi Card
Nec 18x Dvd Burner
3 Sata HD
4X1GB Crucial Ballistix DDR2-800 at 1.8v
It's hard to imagine many non-sli scenarios that could surpass the 300w barrier at all considering this setup is far below.
Running the following (which shows at about 180w idle/225w load at UPS load detector..which I estimate to mean about 150/190w actual power taking into account 80% efficiency)
Core 2 duo E6600 at 3.0ghz and 1.2v core
Gigabyte P35 Mobo
EVGA 7900GTO at 1.3v core
2X120mm Yate Loon
2X92mm Nexus/Scythe
Sound Blaster X-fi + Front Audio Bay
802.11g Wifi Card
Nec 18x Dvd Burner
3 Sata HD
4X1GB Crucial Ballistix DDR2-800 at 1.8v
It's hard to imagine many non-sli scenarios that could surpass the 300w barrier at all considering this setup is far below.