Where is my noise coming from?
Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
Where is my noise coming from?
My system is a lot quieter with some new heatsinks I just put in, but it's still kinda loud, and now I can't really tell where the noise is coming from. Here are the noise-generating components:
- 3 stock Lian-Li 80mm case fans (two in front set to medium speed)
- Fujitsu MAN series 10,000 RPM SCSI hard drive, mounted to the case (which is a longer version of the Lian-Li PC-60)
- PC Power and Cooling Silencer 400 ATX
- 2 Panaflo L1A 80mm fans, each mounted on a SLK-800A heatsink
- Visiontek GeForce 4 Ti 4600
Where is my noise coming from? Or could it be case resonance, preventing me from telling where it's coming from by putting my ear up to different things?
- 3 stock Lian-Li 80mm case fans (two in front set to medium speed)
- Fujitsu MAN series 10,000 RPM SCSI hard drive, mounted to the case (which is a longer version of the Lian-Li PC-60)
- PC Power and Cooling Silencer 400 ATX
- 2 Panaflo L1A 80mm fans, each mounted on a SLK-800A heatsink
- Visiontek GeForce 4 Ti 4600
Where is my noise coming from? Or could it be case resonance, preventing me from telling where it's coming from by putting my ear up to different things?
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
-
- Friend of SPCR
- Posts: 368
- Joined: Mon Jan 06, 2003 5:41 pm
- Location: Melbourne, Australia
- Contact:
I would lay the case on its side, and start by removing the HDD and sitting it on some foam. If the HDD is not it....
Then Disconnect the case fans one by one. After disconnecting each case fan, don't reconnect it.
Then the TI4600. It is the most likely culprit, but could be a bitch to disconnect . If it is still noisy it is only CPU and PSU left...
With the case on it's side and open you should be able to hear if it is the CPU fans or PSU fans ... or PSU electrical noise.
Once you have narrowed that down, If it is the CPU fans (Panaflo's), then you can replace them easy. If it is the PSU or 120mm top of case fan, it is a little harder, but still achievable.
Then Disconnect the case fans one by one. After disconnecting each case fan, don't reconnect it.
Then the TI4600. It is the most likely culprit, but could be a bitch to disconnect . If it is still noisy it is only CPU and PSU left...
With the case on it's side and open you should be able to hear if it is the CPU fans or PSU fans ... or PSU electrical noise.
Once you have narrowed that down, If it is the CPU fans (Panaflo's), then you can replace them easy. If it is the PSU or 120mm top of case fan, it is a little harder, but still achievable.
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
Well, I'm not sure how to describe it except that it's fairly low pitch, like how a jet engine sounds when it first starts up and hasn't nearly gotten up to speed yet.Rusty075 wrote:describe the noise.
Most likely suspects:
1. the SCSI drive is vibrating the heck outta the case.
2. the 4600 is whining like a fat kid in an ice cream parlor
I started by just unplugging the HDD altogether. (The machine makes most of its noise even at idle, so it was OK that the OS couldn't get loaded.) This didn't significantly impact the noise. Neither did unplugging any of the 80mm case fans or the Ti 4600.starsky wrote:I would lay the case on its side, and start by removing the HDD and sitting it on some foam. If the HDD is not it....
Then Disconnect the case fans one by one. After disconnecting each case fan, don't reconnect it.
Then the TI4600. It is the most likely culprit, but could be a bitch to disconnect . If it is still noisy it is only CPU and PSU left...
With the case on it's side and open you should be able to hear if it is the CPU fans or PSU fans ... or PSU electrical noise.
Once you have narrowed that down, If it is the CPU fans (Panaflo's), then you can replace them easy. If it is the PSU or 120mm top of case fan, it is a little harder, but still achievable.
The Panaflo 120 mm on top made a BIG difference.
WIth the 120mm unplugged, I could hear the high pitch whine coming from the HDD. Putting that in a Smart Drive enclosure just about made that noise go away. Now it sounds like the PSU is the loudest component.
Last edited by blahblahbloo on Mon Jul 28, 2003 12:48 am, edited 1 time in total.
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
Actually, the 120mm top of case fan is very easy to replace. Should I replace it with a Papst, undervolt it, or do without?starsky wrote:Once you have narrowed that down, If it is the CPU fans (Panaflo's), then you can replace them easy. If it is the PSU or 120mm top of case fan, it is a little harder, but still achievable.
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
-
- Posts: 37
- Joined: Sat Jul 19, 2003 3:42 pm
- Location: Tucson, AZ, USA
-
- SPCR Reviewer
- Posts: 8636
- Joined: Sat Nov 23, 2002 6:33 am
- Location: Sunny SoCal
-
- Friend of SPCR
- Posts: 809
- Joined: Thu Nov 28, 2002 5:07 pm
- Location: London, UK
You should definetely undervolt any 120mm fan. At 12v any 120mm fan will shift too much air and cause a lot of turbulance noise. I would recommend undervolting the fan to 5v. This will still shift plenty of air at this voltage, just make sure it starts at this voltage all the time, if not increase a little.blahblahbloo wrote:Actually, the 120mm top of case fan is very easy to replace. Should I replace it with a Papst, undervolt it, or do without?starsky wrote:Once you have narrowed that down, If it is the CPU fans (Panaflo's), then you can replace them easy. If it is the PSU or 120mm top of case fan, it is a little harder, but still achievable.
If your noisiest component is your PSU when the 120mm fan is disabled and your HD is in a Smart Drive enclosure. I would recommend modding with a quieter fan OR getting a new PSU that is quiet.
Even 80mm Panaflo 'L1a' is not quiet at 12v, they whine. Consider reducing the voltage to about ~9v where the whine seems to dissapear at this voltage.