Thermalright city + intense sound damping

Show off your quiet rig.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Thermalright city + intense sound damping

Post by IKIKUINTHENUTZ » Fri Feb 22, 2008 10:52 am

Image
Image
Image
Image
Image
Image
Image

JaYp146
Posts: 186
Joined: Fri Jan 05, 2007 3:17 pm
Location: Cleveland, OH
Contact:

Post by JaYp146 » Fri Feb 22, 2008 10:59 am

:shock:

derekva
Posts: 477
Joined: Tue Jun 07, 2005 11:00 am
Location: Puget Sound, WA
Contact:

Post by derekva » Fri Feb 22, 2008 11:35 am

OK - gotta ask: where on earth did you get that heatsink that sits outside of the chassis? Did you build it yourself or from a kit? I certainly haven't seen anything like that from Thermalright.

And I thought I was a Thermalright whore since my desktop has an HR-03 GT, an HR-05 IFX SLI and an XP-90 in it...I'm awestruck.

-D

Kepakko
Patron of SPCR
Posts: 19
Joined: Tue Jul 18, 2006 11:13 am
Location: Finland

Post by Kepakko » Fri Feb 22, 2008 11:53 am

derekva wrote:OK - gotta ask: where on earth did you get that heatsink that sits outside of the chassis? Did you build it yourself or from a kit? I certainly haven't seen anything like that from Thermalright.
It's DFI Transpiper. I haven't bothered installing mine as it doesn't do much.

derekva
Posts: 477
Joined: Tue Jun 07, 2005 11:00 am
Location: Puget Sound, WA
Contact:

Post by derekva » Fri Feb 22, 2008 12:00 pm

Kepakko wrote:
derekva wrote:OK - gotta ask: where on earth did you get that heatsink that sits outside of the chassis? Did you build it yourself or from a kit? I certainly haven't seen anything like that from Thermalright.
It's DFI Transpiper. I haven't bothered installing mine as it doesn't do much.
Ah. Thanks for the info, Kepakko. :)

Actually, it reminds me of some sort of grilling device - but I doubt it gets that hot.

-D

ntavlas
Posts: 811
Joined: Mon Jul 16, 2007 2:35 pm
Location: Greece
Contact:

Post by ntavlas » Fri Feb 22, 2008 1:55 pm

Is that heatsink behind the rear fan an hr05? What is it connected to?
Got lots of aluminium in there :lol:

derekva
Posts: 477
Joined: Tue Jun 07, 2005 11:00 am
Location: Puget Sound, WA
Contact:

Post by derekva » Fri Feb 22, 2008 2:41 pm

OK. One more stupid question: where is the fresh air coming from to the HDD chamber and the PSU chamber? I don't see any intakes, which can't be good for the components (unless it is coming from below, in which case there doesn't appear to be much clearance underneath the chassis).

-D

Fayd
Posts: 379
Joined: Thu May 10, 2007 2:19 pm
Location: San Diego

Post by Fayd » Sat Feb 23, 2008 12:57 pm

PSU fan is pulling it in from the front.

iakovl
Posts: 139
Joined: Wed Mar 09, 2005 6:49 am
Location: israel
Contact:

Post by iakovl » Sat Feb 23, 2008 3:08 pm

IKIKUINTHENUTZ can you tell us more about your rig?

chahahc
Posts: 75
Joined: Tue Oct 23, 2007 7:52 pm
Location: The Most Mexican Place in the U.S.A

Post by chahahc » Sat Feb 23, 2008 4:01 pm

:shock: What do you get when you cross Snoop Dogg, a computer geek, lots of thermal paste,and a fat wallet?...Pimpin.. .:lol: ....But seriously, that's impressive. How much does it weigh? And I'm a bit curious on the performance of the hr-03+, since other than that one German site (sorry I forgot the name of it), there doesn't seem to be many thorough reviews on the heatsink.

cienislaw
Posts: 54
Joined: Tue Jul 25, 2006 9:28 pm
Location: Poland

Post by cienislaw » Sun Feb 24, 2008 3:37 am

nice bling bling effect, but what are specs of system, and temps of all components?

LBadvance
Posts: 177
Joined: Tue Jan 18, 2005 7:35 pm

Post by LBadvance » Sun Feb 24, 2008 3:55 pm

I don't think you have enough heatsinks. :shock:

pingu666
Friend of SPCR
Posts: 739
Joined: Sun Aug 11, 2002 3:26 pm
Location: swindon- england :/
Contact:

Post by pingu666 » Sun Feb 24, 2008 8:06 pm

thats crazy.

well done :D

looks like a good wtx case too...

jhhoffma
Posts: 2131
Joined: Mon Apr 25, 2005 10:00 am
Location: Grand Rapids, MI

Post by jhhoffma » Mon Feb 25, 2008 8:15 am

Image

I looks like it has the makings of a quiet pc, lots of passive heatpipes and whatnot, but can it be true with still having that many fans?

Unlikely, but quiet is in the eye of the beholder.

xan_user
*Lifetime Patron*
Posts: 2269
Joined: Sun May 21, 2006 9:09 am
Location: Northern California.

Post by xan_user » Mon Feb 25, 2008 8:35 am

jhhoffma wrote: Unlikely, but quiet is in the eye of the beholder.
:lol:
Wow you can hear with your eyes!



:?:It looks like the HS on back blocks two of the monitor ports?....

KansaKilla
Friend of SPCR
Posts: 381
Joined: Fri Aug 01, 2003 12:13 pm
Location: Rochester, MN

Post by KansaKilla » Wed Feb 27, 2008 10:41 am

how much did all those heatsinks cost?

derekva
Posts: 477
Joined: Tue Jun 07, 2005 11:00 am
Location: Puget Sound, WA
Contact:

Post by derekva » Wed Feb 27, 2008 11:05 am

xan_user wrote::?:It looks like the HS on back blocks two of the monitor ports?....
Look at the 5th photo - he's using Crossfire - no need for multiple monitor ports.

-D

Eduardo
Posts: 15
Joined: Sun Jan 27, 2008 12:25 pm

Post by Eduardo » Wed Feb 27, 2008 6:21 pm

so shiny!! my preciousssss...

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Post by IKIKUINTHENUTZ » Thu Mar 06, 2008 10:06 am

Just more picture with details
Image
Image
Amazing Enough, A HR-09 Type 3 perfectly fits onto HD3870s with push pins
Image
Side panel FOamed up
Image
as you can see, foam is wedged between the pexi and side
Image
Every section you see with foam comprosed of 3 layers
1. Silicone adhesive which very easy to remove
2. Neoprene sheets for adding mass and make easy clean up if I remove the foam
3. Either I use Sonex Acoustic (melamine foam, white) or Some inexpensive cellous foam (sponge, commonly found in black) you can get from any computer shop
Image
Finnaly after weeks of searching this rare long crossfire cable, asus includes them in their High end AM2+ motherboards and I was able to get this rare cable off of ebay :D
Image
the other side panel

KansaKilla
Friend of SPCR
Posts: 381
Joined: Fri Aug 01, 2003 12:13 pm
Location: Rochester, MN

Post by KansaKilla » Fri Mar 07, 2008 8:16 am

"Lord Vader, your computer is ready."

(Anyone remember those Impala ads from circa 1995?)

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Post by IKIKUINTHENUTZ » Mon Mar 10, 2008 11:19 pm

Both cards in Crossfire, results recorded using ATi Catalyst in OverdriveTM sub menu, MX-2 were used as the TIM during the mounting of the aftermarket HR-03 coolers

Both card's clock speeds are
Core: 800
mem: 1170
HD 3870s

#1 is the bottom card
#2 is the top card next to 2 fans

Ambient 22c
Idel
#1: 43c
#2: 36c

Load
Results Recorded during the 30 mins of crysis game play by average
#1: 71
#2: 51

Im trying to replace the side panel for one with side exaust to furthur reduce tempatures

Other info
DFI X38
Q6600
PCpower cooling 750w silencer
2 X 250 GB single platter seagates in raid 0/1 intel matrix

lor77
Posts: 205
Joined: Sun Sep 03, 2006 2:08 am
Location: Hellas

Post by lor77 » Wed Mar 12, 2008 3:55 pm

IKIKUINTHENUTZ Very nice built you have there.
I was more interested in the damping you used.
Did it have any effect in reducing the noise produced,how you describe the noise before and after foam was applied?(I mean all this layers)
Congrats again on the built.!!

NeilBlanchard
Moderator
Posts: 7681
Joined: Mon Dec 09, 2002 7:11 pm
Location: Maynard, MA, Eaarth
Contact:

Post by NeilBlanchard » Wed Mar 12, 2008 5:18 pm

Hello,

The fan grills seem to be pretty restrictive. I think that it takes the cake on heatsink surface area...

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Post by IKIKUINTHENUTZ » Fri Mar 14, 2008 12:40 pm

lor77 wrote:IKIKUINTHENUTZ Very nice built you have there.
I was more interested in the damping you used.
Did it have any effect in reducing the noise produced,how you describe the noise before and after foam was applied?(I mean all this layers)
Congrats again on the built.!!
Without damping, the case made a somewhat hollow echo noise. This case is huge and I barely have anything inside of it XD

I am going to increase the damping and add in a side fan when I get my brand new sidepanel, no ugly pexiglass for me.
NeilBlanchard wrote:Hello,

The fan grills seem to be pretty restrictive. I think that it takes the cake on heatsink surface area...
Already working on it mate :wink: I left it in because it looks asthetically good to me, im working on a plain fan grill spray painted black lol

kater
Posts: 891
Joined: Thu Sep 07, 2006 11:20 pm
Location: Poland

Post by kater » Mon Mar 24, 2008 11:52 pm

You're still missing one HR-11 :D
Nice, hefty build, lotsa metal & cooling surface.
I'm always wondering - how quiet those PC P&C beauts are?

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Post by IKIKUINTHENUTZ » Thu Mar 27, 2008 8:50 am

kater wrote:You're still missing one HR-11 :D
Nice, hefty build, lotsa metal & cooling surface.
I'm always wondering - how quiet those PC P&C beauts are?
I already tried, it is impossible to add another HR-11 on the 2nd card due to space constraints

Honestly im suprised how quite my PC P&C is with a 80mm san ace inside of it. I guess it's seasonic's ingenuity trademark in all their psus (it's a seasonic OEM) but I have heard cosair psu noise levels and they are a bit lower in fan motor noise.

I got my new side panel recently and some SLipstream fans, I will post updated pics later

oxygen200000
Posts: 77
Joined: Sun Feb 03, 2008 8:44 am
Location: Bucharest, ROMANIA
Contact:

Post by oxygen200000 » Fri Mar 28, 2008 3:11 am

You can use HR 05 SLI instead of HR 05 and you'll have more space near the 2nd VGA card...

elec999
Posts: 273
Joined: Wed Jun 30, 2004 10:54 pm

Post by elec999 » Fri Mar 28, 2008 4:23 am

Where did you get the material from.
Thanks

lor77
Posts: 205
Joined: Sun Sep 03, 2006 2:08 am
Location: Hellas

Post by lor77 » Fri Mar 28, 2008 12:10 pm

Again another question about dampening.
Which product exactly from Sonex did you use?
I mean there are a bunch products in Sonex wed site,did you use the classic foam or Sonex One Foam?
Thanks,and again congrats for your built.

IKIKUINTHENUTZ
Posts: 64
Joined: Fri Aug 17, 2007 11:28 pm

Post by IKIKUINTHENUTZ » Fri Mar 28, 2008 10:37 pm

oxygen200000 wrote:You can use HR 05 SLI instead of HR 05 and you'll have more space near the 2nd VGA card...
There is no HR-05, it is clearly shown in all my pictures, if your thinking of over lapping over to the DFI NB heatsink then that is still impossible, the HR-03 on the first card blocks the only other possible orientation of a HR-11 on the 2nd card, the other 2 ways are still blocked by the first card PCB
elec999 wrote:Where did you get the material from.
Thanks
Jab-tech, SVC, Performance-pcs, Xoxide.com, MPtech, Ace Hardware, and my personal favorite http://www.mcmaster.com/
lor77 wrote:Again another question about dampening.
Which product exactly from Sonex did you use?
I mean there are a bunch products in Sonex wed site,did you use the classic foam or Sonex One Foam?
Thanks,and again congrats for your built.
Sonex Mini 1"

Post Reply