MSI IM-945GSE-A (MS-9830) mini-itx atom N270 board

All about them.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
shaoyu
Posts: 36
Joined: Thu Nov 06, 2008 12:05 pm
Location: USA

MSI IM-945GSE-A (MS-9830) mini-itx atom N270 board

Post by shaoyu » Sun Nov 16, 2008 6:37 pm

Looks like it is going to be available soon. Retails for US$180-$200 :shock:
I guess you'd have to pay for dvi port and low power design, but didn't realize it was gonna be this much expensive :(

http://www.logicsupply.com/products/ms_9830
http://www.buy.com/prod/intel-atom-n270 ... 42599.html

Review:
http://www.mini-itx.com/reviews/atoms/

stevea
Posts: 32
Joined: Thu Jul 31, 2003 1:57 pm

Post by stevea » Tue Dec 16, 2008 11:25 am

I'm not surprised at the price - no fans means more heat-sink, and this is an industrial board w/ a nextended temp/vibe spec. Probably a great choice for a carputer.

Problems tho ... they use the N270 rather than the N330 processor (lower performance for a mosdest poewr increase). They use the 945GSE (mobile) Northbridge which save a LOT of power but at a cost of reducing the memory bus bandwith by more than a factor or two.

The major problem w/ the Intel Aton is there is no decent performance low-power NorthBridge.

The other boardds (like the Itntel) use a NB that consumes ~4x the power as the CPU and then they attach a noisy short-lived 40mm fan to the NB - ugh !

ilovejedd
Posts: 676
Joined: Tue Oct 21, 2008 4:14 pm
Location: in the depths of hell

Post by ilovejedd » Thu Jan 01, 2009 7:37 pm

Just found this motherboard. Do you guys think this might work in a completely fanless system? Planning on this case.

jessekopelman
Posts: 1406
Joined: Tue Feb 13, 2007 7:28 pm
Location: USA

Post by jessekopelman » Fri Jan 02, 2009 8:02 pm

stevea wrote: The major problem w/ the Intel Aton is there is no decent performance low-power NorthBridge.
What about Nvidia 9300M (not yet available but looks like it will be) and Intel US15W (actually available, but apparently not for retail)? You are certainly correct, for the time being, but 2009 should bring some changes.

sjukfan
Posts: 3
Joined: Sat Aug 02, 2008 7:48 pm
Location: Sweden

Post by sjukfan » Sat Jan 03, 2009 9:08 am

WOT? It has two com ports? I guess it's made for embedding in industrial machines 'n stuff. But it's kind of expensive, I've seen the Intel D945GCLF2 for only $80(-ish).

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

Just bought one

Post by Worker control » Mon Jan 05, 2009 12:25 pm

I just received one that I bought from Logic Supply. The BIOS has temp-based system fan voltage control. I haven't installed an OS on it yet, but it looks good so far. I expect its performance and power usage to be similar to the Eee Box, which uses the same CPU and NB.

ilovejedd
Posts: 676
Joined: Tue Oct 21, 2008 4:14 pm
Location: in the depths of hell

Post by ilovejedd » Mon Jan 05, 2009 1:45 pm

jessekopelman wrote:What about Nvidia 9300M (not yet available but looks like it will be) and Intel US15W (actually available, but apparently not for retail)? You are certainly correct, for the time being, but 2009 should bring some changes.
The Nvidia 9300M/Ion platform sounds nice, but that'll only happen if Intel takes that stick off its arse and allow other chipsets to be used with Atom. Until then, we're stuck with the crappy 945G. Oh and last I checked, the Atom + US15W is darned expensive.

jessekopelman
Posts: 1406
Joined: Tue Feb 13, 2007 7:28 pm
Location: USA

Post by jessekopelman » Mon Jan 05, 2009 3:33 pm

ilovejedd wrote: The Nvidia 9300M/Ion platform sounds nice, but that'll only happen if Intel takes that stick off its arse and allow other chipsets to be used with Atom.
Intel claims they have done this. Nvidia claims Intel has done this. If products based Ion (or similar) ship in 2009 we will know these claims are true and if not we will know they are false.

Subx13
Posts: 1
Joined: Mon Mar 02, 2009 3:56 pm
Location: CT

Serial Ports

Post by Subx13 » Tue Mar 03, 2009 1:01 pm

Has anyone used this board yet. It looks like the serial ports are labeled wrong in the manual. I need the RS-485 port to work and I can't get it to communicate at all. MSI Tech support stinks. No responses to email and no call backs.

shaoyu
Posts: 36
Joined: Thu Nov 06, 2008 12:05 pm
Location: USA

Post by shaoyu » Thu May 14, 2009 9:10 pm

I had to changed the BIOS setting Advanced->IDE Configuration->ATA/IDE Configuration to 'Enhanced' to make it work with SATA hard drives. Under the default 'compatible' mode it was throwing bunches of timeout error messages while installing linux.

MSI is lazy here it doesn't even post user manual on its website.

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

built a firewall/NAT/file server

Post by Worker control » Thu May 14, 2009 9:36 pm

Reasonably happy with the board. System description here:

viewtopic.php?p=463825#463825

MiKeLezZ
Posts: 110
Joined: Sun Feb 20, 2005 8:00 am
Location: ITALY
Contact:

Post by MiKeLezZ » Mon May 18, 2009 1:19 am

Hey, don't want to spoil your party... the new Intel Atom seems to be better than this MSI:
viewtopic.php?p=465508

Worker control
Posts: 126
Joined: Wed Nov 16, 2005 12:16 pm

Post by Worker control » Mon May 18, 2009 6:21 am

MiKeLezZ wrote:Hey, don't want to spoil your party... the new Intel Atom seems to be better than this MSI:
viewtopic.php?p=465508
Well, certainly very similar. The MSI board has two NICs, and the Intel board is cheaper.

Post Reply