Fanless 5750 announced

They make noise, too.

Moderators: NeilBlanchard, Ralf Hutter, sthayashi, Lawrence Lee

Post Reply
boost
Posts: 661
Joined: Wed Jul 12, 2006 10:29 am
Location: de_DE

Fanless 5750 announced

Post by boost » Thu Nov 05, 2009 5:19 am

New fanless 5750 from Powercolor. "The PowerColor SCS3 HD5750 will be available on Nov. 20th and will retail at US$149"
Image
Looks like an Arctic Cooling S1. Low idle power, good performance and HDMI audio capabilitites makes for a great HTPC card.
Press release: http://www.powercolor.com/Global/NewsInfo.asp?id=834

sampo
Posts: 41
Joined: Tue Apr 28, 2009 1:56 am
Location: Finland

Post by sampo » Thu Nov 05, 2009 6:00 am

This is great. I was starting to lose hope.

~El~Jefe~
Friend of SPCR
Posts: 2887
Joined: Mon Feb 28, 2005 4:21 pm
Location: New York City zzzz
Contact:

Post by ~El~Jefe~ » Thu Nov 05, 2009 7:08 am

This thing looks awesome, yes it does.

_MarcoM_
Posts: 294
Joined: Thu Jul 21, 2005 11:58 am

Post by _MarcoM_ » Thu Nov 05, 2009 10:23 am

With a decent quiet fan, it will be a nice gaming card, too :)

Freeco
Posts: 134
Joined: Wed Nov 08, 2006 7:26 am
Location: Belgium
Contact:

Post by Freeco » Thu Nov 05, 2009 10:27 am

I've been on the lookout for a card like this to replace my passive 7600GS, but under stress this baby still draws around 85W, while my oldie only asks around 35-40W under full load. But performance wise it's no match, that's a fact :wink:

I'm still waiting for the release of the value series of this generation AMD (HD 5650??) and make a decission between those 2.

Parappaman
Posts: 419
Joined: Mon Aug 31, 2009 12:30 am
Location: Italy

Post by Parappaman » Thu Nov 05, 2009 12:05 pm

This card probably idles lower than your 7600GS, you really shouldn't be too worried about its power consumption. :wink:

_MarcoM_
Posts: 294
Joined: Thu Jul 21, 2005 11:58 am

Post by _MarcoM_ » Thu Nov 05, 2009 12:30 pm

Freeco wrote:I've been on the lookout for a card like this to replace my passive 7600GS, but under stress this baby still draws around 85W, while my oldie only asks around 35-40W under full load. But performance wise it's no match, that's a fact :wink:
According to xbit lab, power consumption is 11W idle, 44W load:
http://www.xbitlabs.com/articles/video/ ... d5750.html
viewtopic.php?p=487201#487201

Not bad, isn't it? :wink:

40974111
Posts: 76
Joined: Wed Jun 03, 2009 3:51 am
Location: Sydney

Post by 40974111 » Thu Nov 05, 2009 7:40 pm

What do you think the possibility of this card running in a completely passive environment will be? (as of the end of the month the only moving part will hopefully be in a bottom mounted Seasonic X-650).

Replaced my 4850 because it struggled to run under 100 degrees in 2D mode on hot days (in a completely passive environment), and absolutely failed in 3D mode.

Currently using a 4550 but I need a bit more power than it gives.

rhys j
Posts: 31
Joined: Thu Oct 15, 2009 6:46 pm
Location: England

Post by rhys j » Thu Nov 05, 2009 7:57 pm

Looks awesome.

Wonder if it's going to be available in the UK? Might sell my GTX260 and get one of these. Slightly less performance (but not far off), but silent and less than half the power rating!

~El~Jefe~
Friend of SPCR
Posts: 2887
Joined: Mon Feb 28, 2005 4:21 pm
Location: New York City zzzz
Contact:

Post by ~El~Jefe~ » Thu Nov 05, 2009 9:42 pm

40974111 wrote:What do you think the possibility of this card running in a completely passive environment will be? (as of the end of the month the only moving part will hopefully be in a bottom mounted Seasonic X-650).

Replaced my 4850 because it struggled to run under 100 degrees in 2D mode on hot days (in a completely passive environment), and absolutely failed in 3D mode.

Currently using a 4550 but I need a bit more power than it gives.
You know, I have a phantom 350 Antec psu. Now, I have tried to see what a fully passive setup would be like using this psu. I can say that passive components require case flow.

Strangely, they also require the case to be closed. If i keep all of the components open to the air unrestricted, the components get quite warm. Apparently, the passive components need to be a part of the flow of air or pressure of air in order to operate as intended.

I do not think any system over like 60 watts or so total load could be done truly passive

Freeco
Posts: 134
Joined: Wed Nov 08, 2006 7:26 am
Location: Belgium
Contact:

Post by Freeco » Fri Nov 06, 2009 7:34 am

_MarcoM_ wrote:According to xbit lab, power consumption is 11W idle, 44W load:
http://www.xbitlabs.com/articles/video/ ... d5750.html
viewtopic.php?p=487201#487201

Not bad, isn't it? :wink:
mmm, indeed! I don't know where I get that 85W spec. Maybe I'm confusing with another model/review I read earlier.
But as I don't need that much 3D power, I'm still curious for the value line :)

lechuck
Posts: 86
Joined: Mon Dec 04, 2006 11:57 pm
Location: EU

Post by lechuck » Fri Nov 06, 2009 10:54 am

@40974111: I'd say in idle you could perhaps go away with a completely passive environment - depending of other components. But under load no chance. Under load you need airflow as normal setup hits over 100W easy.

ATWindsor
Posts: 285
Joined: Mon Apr 18, 2005 11:53 pm

Post by ATWindsor » Mon Nov 09, 2009 12:38 am

Nice, a fanless version, with a fan strapped on this vil be a nice addition to my HTPC.

AtW

Freeco
Posts: 134
Joined: Wed Nov 08, 2006 7:26 am
Location: Belgium
Contact:

Post by Freeco » Thu Nov 12, 2009 10:42 am

Nice timing of my 7600GS actually: I've done some testing why my system locks up after a couple of seconds 3D, and it seems there's some hardware damage to my 'old' card. Even holding a 120mm fan close to the heatsink doesn't help, while swapping to an even older X300 gives no problem at all.

Seems buying a HD5750 has become more real than I thought :lol: But for the moment the choice is still too limited: only 1 vendor with a passive model. I can still wait a bit more for other vendors to lauch some other variations. I don't need 1GB of RAM for example... 512MB will do fine.
If someone comes across a new one, do post the link :wink:

SouthBayQuiet
Posts: 1
Joined: Thu Nov 12, 2009 12:29 pm
Location: San Jose

Will this fit in a Solo

Post by SouthBayQuiet » Thu Nov 12, 2009 12:32 pm

Anyone know if this will fit in a SOLO, EVGA P55 FTW MOBO with no other cards?

Same question for the sapphire vapor-x 5750.


Thanks.

~El~Jefe~
Friend of SPCR
Posts: 2887
Joined: Mon Feb 28, 2005 4:21 pm
Location: New York City zzzz
Contact:

Post by ~El~Jefe~ » Thu Nov 12, 2009 3:27 pm

Freeco wrote:Nice timing of my 7600GS actually: I've done some testing why my system locks up after a couple of seconds 3D, and it seems there's some hardware damage to my 'old' card. Even holding a 120mm fan close to the heatsink doesn't help, while swapping to an even older X300 gives no problem at all.

Seems buying a HD5750 has become more real than I thought :lol: But for the moment the choice is still too limited: only 1 vendor with a passive model. I can still wait a bit more for other vendors to lauch some other variations. I don't need 1GB of RAM for example... 512MB will do fine.
If someone comes across a new one, do post the link :wink:
if you dont need the 1gb of ram, you dont need the 5750. You should just buy a 4770 and save 70 dollars. The ram is 100% used and is only 10 dollars more.

Freeco
Posts: 134
Joined: Wed Nov 08, 2006 7:26 am
Location: Belgium
Contact:

Post by Freeco » Fri Nov 13, 2009 12:29 am

Let's not get too much off-topic on this choice of videocard of mine :wink:
I want one from the HD57xx (or future HD56xx) series because of the low power consumption idle & load. Or if nVidia launches something similar in the near future that 'll be worth another investigation.
I know the HD4xxx series are cheaper, but they also draw more power. I'm woried my 380W PSU won't suffice when the GPU goes to full load.

vincentfox
Posts: 271
Joined: Sun Oct 09, 2005 8:35 pm
Location: CA

Post by vincentfox » Fri Nov 13, 2009 3:29 pm

Well it's interesting but .... no cards!

I checked NewEgg and no entry there to even indicate "autonotify when it's in stock". This guff about shortages of 40nm parts from the fabs, means it's likely to be a paper launch.

~El~Jefe~
Friend of SPCR
Posts: 2887
Joined: Mon Feb 28, 2005 4:21 pm
Location: New York City zzzz
Contact:

Post by ~El~Jefe~ » Fri Nov 13, 2009 7:06 pm

I was waiting for a vaporx version of the 5770.

To me, this one makes the most sense. the 5750 already is lower wattage than almost anything ever made for gaming.

It seems that ATI controls the other companies with an iron grip. No one would really want to make 1-2 months worth of reference cards unless forced to. If the 5770 was made vaporx, people would have the ability to meet 5850 speeds without the extra 120 dollars spent.

They keep picking the top and lowest ends to make custom. It's obvious, controlling and irritating. I wouldnt call all of this a paper launch, I just bought a xfx 5770 yesterday at Microcenter, a regular computer store.

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

Re: Fanless 5750 announced

Post by dhanson865 » Sat Nov 14, 2009 1:19 pm

boost wrote:New fanless 5750 from Powercolor. "The PowerColor SCS3 HD5750 will be available on Nov. 20th and will retail at US$149"
Image
Looks like an Arctic Cooling S1. Low idle power, good performance and HDMI audio capabilities makes for a great HTPC card.
Press release: http://www.powercolor.com/Global/NewsInfo.asp?id=834
Looks nice and at basically $0 premium over the fanned model it's a good value for me.

danimal
Posts: 734
Joined: Mon Jun 08, 2009 2:41 pm
Location: the ether

Re: Fanless 5750 announced

Post by danimal » Sun Nov 15, 2009 8:53 am

boost wrote:New fanless 5750 from Powercolor. "The PowerColor SCS3 HD5750 will be available on Nov. 20th and will retail at US$149"
not enough horsepower, unfortunately.

i paid the same $149(after rebate) for a gtx 260 last summer, and it does 4 fps more in warhead, according to that xbit link that was posted... albeit at the expense of more noise and more heat, tho :-/

5870!!

dhanson865
Posts: 2198
Joined: Thu Feb 10, 2005 11:20 am
Location: TN, USA

PowerColor Go! Green HD5750

Post by dhanson865 » Thu Jan 14, 2010 7:09 am

PowerColor Go! Green HD5750 = http://www.powercolor.com/Global/NewsInfo.asp?id=929

New lower power fanless 5750.

I haven't found a price yet but this looks like it might be the absolute sweet spot for silent gaming.

home theater users will want to save power and get the new 5670 instead but the gaming numbers don't favor the 5670 on demanding titles. http://www.anandtech.com/printarticle.aspx?i=3720


Update: http://www.powercolor.com/Global/produc ... uctID=6838 shows specs and part number

PowerColor Go! Green HD5750 1GB GDDR5 AX5750 1GBD5-NS3DH

Post Reply