Gelid Silent Spirit & Scythe Samurai ZZ CPU Coolers

Want to talk about one of the articles in SPCR? Here's the forum for you.
Post Reply
Lawrence Lee
SPCR Reviewer
Posts: 1115
Joined: Fri Mar 04, 2005 9:07 pm
Location: Vancouver

Gelid Silent Spirit & Scythe Samurai ZZ CPU Coolers

Post by Lawrence Lee » Sat May 29, 2010 10:31 pm


DAve_M
Posts: 198
Joined: Sun Sep 02, 2007 9:58 am
Location: UK

Post by DAve_M » Mon May 31, 2010 11:33 am

I must say I've had a silent spirit for some 9 months already. I find to to be excellent because I bent out the heatpipes so I can run with a fanless CPU heatsink. I basically copied the SPCR article single moving part PC. I have an athlon x2 65w undervolted inside an antec solo. With a very slow moving 120mm case fan it performs great. Most of the time the heatsink doesn't really feel any hotter than ambient. Under load (full speed but undervolted a bit) it gets warm but nowhere near hot. Probably in the 40 something degree range for CPU temps. As for noise, the PC is on the verge of inaudible. The loudest part is a samsung eco green f2 500GB (quietest hard disk reviewed by SPCR?) mounted inside a scythe quiet drive. That's mainly during seeks and it's not noise from vibration.

Anyway, I would recommend the silent spirit just because it enables you to do that. I've been very pleased with it and the main reason I went for it was because there was a limited choice of suitable heatsinks. I thought the stock fan was pretty disappointing though. I replaced it immediately and doubt I will ever use it again.

Oh and my silent spirit came with 1366 mounting clips in a little box. LGA1156 clips are available in theory, but the are nowhere to be found it seems. Plus on price, the silent spirit is cheaper at least over here. Around £18 (26 USD) compared to £25 (36 USD) for the ZZ which is 39% higher.

Reachable
Friend of SPCR
Posts: 396
Joined: Wed Nov 19, 2003 9:55 am
Location: Western Mass.

Post by Reachable » Mon May 31, 2010 1:14 pm

The Silent Spirit is utterly cute when it's upside down in the photos. It looks like an earnest little robot.

OK, that shed's no light whatsoever on the subject, but I had to say it. :lol:

new2spcr
Friend of SPCR
Posts: 230
Joined: Wed Apr 22, 2009 9:14 am
Location: Sweden

Re: Gelid Silent Spirit & Scythe Samurai ZZ CPU Coolers

Post by new2spcr » Fri Jun 04, 2010 10:39 am

Thanks for the review. It's always nice to see the manufacturers come up with something "new", like tilted concepts to see how well or bad they perform.

MikeC
Site Admin
Posts: 12285
Joined: Sun Aug 11, 2002 3:26 pm
Location: Vancouver, BC, Canada
Contact:

Post by MikeC » Fri Jun 04, 2010 10:51 am

Interestingly, Gelid has a more conventional tower HS now --
http://www.gelidsolutions.com/products/ ... d=12&id=46

thejamppa
Posts: 3142
Joined: Mon Feb 26, 2007 9:20 am
Location: Missing in Finnish wilderness, howling to moon with wolf brethren and walking with brother bears
Contact:

Post by thejamppa » Sat Jun 05, 2010 2:10 am

I'm impressed by Samurai ZZ. I might get one for the linux system. Retail in here around 23€'s. Xigmatek HDT-1264 though is special sale 15€'s... Uhm, which one to get.

Thank you again for great review. It seems budget silent cooling is easier as more manufacturer's bring good coolers in budget price.

Vibrator
Posts: 94
Joined: Sun May 31, 2009 9:46 am
Location: British Columbia

Post by Vibrator » Sun Jun 06, 2010 6:59 am

I wish Scythe would stop bundling sleeve bearing fans with their coolers :/

loimlo
Posts: 762
Joined: Thu May 03, 2007 3:58 am
Location: Formosa

Post by loimlo » Sun Jun 06, 2010 7:30 am

Why? Scythe fans performed wonderfully in SPCR review, especially their 120mm fans.

Vibrator
Posts: 94
Joined: Sun May 31, 2009 9:46 am
Location: British Columbia

Post by Vibrator » Sun Jun 06, 2010 6:27 pm

loimlo wrote:Why? Scythe fans performed wonderfully in SPCR review, especially their 120mm fans.
Longevity concerns.

I've had sleeve bearing fans die on me within 2 years of moderate use before

Post Reply